1968 Hot Wheels
US - Custom Corvette (6215) - [1968-1971]
US - Custom Corvette (6215) - [1968-1971]
US Casting Menu - Chassis
Items in Red show changes from previous version
Under Construction.... No valid information on this page.... Do not use.
-
-
Tool #3 - (Type 0-3) -
1st USA Hot Wheel - Custom Corvette
Part #6215-048-3
- Released after: 09-Jul-1970
- Revision Letter: none
- Mattel Revision: A
- HOT WHEELS Trademark: TM
- 1967 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle Holes: 4 rectangular
- Front body post hole: D shaped
- Tool numbers: 3
- Car Usage: 1st USA Hot Wheels Prototype (Corvette)
-
-
Type A Tool # 1 -
Kidney Bean
Part # none
- Released after: ?
- Revision Letter: A or none
- Mattel Revision: A
- HOT WHEELS Trademark: TM
- 1966 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Antifreeze
- Tool numbers: 1,2
- Car Usage: 1st USA Hot Wheels Production (Corvette)
- Only a dozen or two cars exist.
-
-
Type B Tool # 1 -
Tabbed
Part # none
- Released after: ?
- Revision Letter: A or none
- Mattel Revision: A
- HOT WHEELS Trademark: TM
- 1966 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Antifreeze
- Tool numbers: 1,2
- Car Usage: Tabbed Hybrid
-
-
Type C Tool # 1 -
Mid Tabbed
Part # none
- Released after: ?
- Revision Letter: A or none
- Mattel Revision: A
- HOT WHEELS Trademark: TM
- 1966 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Antifreeze, Blue and Red
- Tool numbers: 1,2
- These are the majority of early run Bases
- Type B,C, D bases are not identifiable from the outside of the base
- many changes made to the inside of the base
-
-
Type D Tool # 1 -
Late Tabbed
Part # none
- Released after: ?
- Revision Letter: A or none
- Mattel Revision: A
- HOT WHEELS Trademark: TM
- 1966 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Antifreeze, Blue and Red
- Tool numbers: 1,2
- These are the majority of early run Bases
- Type B,C, D bases are not identifiable from the outside of the base
- Beveled edges on inside of base.
- These are the majority of the Early Run Bases.
-
-
Type E Tool # 1 -
TM - Trade Marked
Part # none
- Released after: Entirely new Chassis created
- Revision Letter:
- Mattel Revision:
- HOT WHEELS Trademark: TM
- 1967 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Antifreeze, Blue and Red & Black
- Tool numbers: 1,2
- Center Holes were strengthened to allow their use, in place of tabs, to help locate the base on a Fixture while the axles were pinched into place.
- Type B,C, D bases are not identifiable from the outside of the base
-
-
Type F Tool # 1 -
Registered - Small R w/TM- Late Run
Part # none
- Released after: 1969
- Revision Letter:
- Mattel Revision:
- HOT WHEELS Trademark: Small-R TM
- 1967 Copyright: Small circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Black
- Tool numbers: 1,2
- Trademark (TM) after "wheels" is moved down after "Corvette"
-
-
Type G Tool # 1 -
Registered - Big R no TM- Late Run
Part # none
- Released after: 1969
- Revision Letter:
- Mattel Revision:
- HOT WHEELS Trademark: Big-R TM
- 1967 Copyright: Big circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Black
- Tool numbers: 1,2
-
-
Type H Tool # 1 -
Registered - Big R w/TM- Late Run
Part # none
- Released after: 1969
- Revision Letter:
- Mattel Revision:
- HOT WHEELS Trademark: Big-R w/TM
- 1967 Copyright: Big circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Black
- Tool numbers: 1,2
-
-
Type H Tool # 1 -
Leaf Spring - Wheel Strip
Part # none
- Released after: 1969
- Revision Letter:
- Mattel Revision:
- HOT WHEELS Trademark: Big-R w/TM
- 1967 Copyright: Big circle-C
- Axles: HK 2-wheel wire
- Axle supports: Short
- Tail panel: Black
- Tool numbers: 1,2
US Custom Corvette - Common Chassis Details All Bases came from two Tools, to tell them apart from the outside easily:Tool #1 - USA
- Gas Tank imperfection
- Front Axle: Straight
Tool #2 - USA - Gas Tank imperfection - None
- Front Axle: Crooked
Info
Copyright © 2024 www.HWRedlines.com All rights reserved.
The pictures and descriptions on this site may not be reused without obtaining prior permission.
Hot Wheels are a registered Trademark of Mattel Inc. This site is not affiliated with Mattel Inc. in any way.
-
Prototype - Type: 2 - Late Run - Leaf Spring
-
Production - Type: H - Late Run - Big-R w/TM
-
Production - Type: G - Late Run - Big-R no TM
-
Production - Type: F - Late Run - Small-R w/TM
-
Production - Type: E - Middle Run - TM
-
Production - Type: D - Late Tabbed
-
Production - Type: C - Mid Tabbed
-
Production - Type: B - Tabbed Hybrid
-
Production - Type: A - Kidney Bean
-
Prototype -
Type: 0 - 1st USA Hot Wheel